STEEL STRUCTURES

Industrial sliding lift automatic doors

Entrance automatic double-wing and sliding automatic doors

FENCES

Balcony

House

Industrial

Grille protection for windows and doors

LIGHTING FIXTURES

STREET LAMPS

PARK BENCHES

WASTE BINS

ADVERTISING PANELS

FLAG POLES

CONTAINERS

RESIDENTIAL

INDUSTRIAL

KIOSKS

ALU JOINERY
PVC JOINERY

INDUSTRIAL EQUIPMENT

INOX FITTINGS

NEEDLE VALVES 700 bar

BALL VALVES

PRESSURE GAUGE SNUBBERS

UNIONS

COUPLINGS

TRANSITIONS

LUBRICATORS 700 bar

SAMPLING BOTTLES 700 bar

CHECK VALVES

GENERAL REPAIR

WELL GATES

DOUBLE AND TRIPLE VALVES

CHECK VALVES

OIL TANK FIRE PROTECTION

HEAT EXCHANGERS

SEALS

PIPELINE REHABILITATION BY PULLING PE PIPES

TANKS FOR GAS STATIONS
TECHNOLOGICAL SEWAGE TANK

RUBBER-LINED STEEL TANK WITH ACID AND ALKALI DISTRIBUTION 35 m³

INOX BUTTERFLY VALVE No 1500 mm
AUTOMATICALLY CONTROLLED

COMMUNAL ECO EQUIPMENT

COMMUNAL CONTAINERS OPEN, CLOSED 5,7 and 10 m³

COMMUNAL CONTAINERS OPEN, CLOSED for paper 5,7 and 10 m³

Plastic waste bins, 60, 100, 200 and 300 liters

CONTAINER 7 M3 FOR ELECTRONIC WASTE AND RAGS

SEPTIC TANKS, OIL AND GREASE SEPARATORS 800 LIT SINGLE-CHAMBER

WASTE OIL TANK WITH TANK WAGON FROM 1000 TO 20000 LIT.

BARREL RACKS WITH TANK WAGON UP TO 9 BARRELS

BARREL RACKS WITH PUMP FOR FILLING AND EMPTYING

BARREL RACKS WITH TANK WAGON OPEN AND CLOSED FOR FILLING, EMPTYING AND DOSING

CONTAINERS FOR ACCUMULATORS, OILY RAGS AND SAND

ROAD BARRIERS ROAD PARTITIONS — ROAD BARRIERS
ROAD PARTITIONS

MOBILE STORAGE FLAMMABLE LIQUID STORAGE PAINT AND VARNISH STORAGE BOTTLE STORAGE — MOBILE STORAGE
FLAMMABLE LIQUID STORAGE
PAINT AND VARNISH STORAGE
BOTTLE STORAGE

1000 LITER TANK WITH PUMP AND FLOW METER FOR DISPENSING WITH ONE AND TWO WALLS OPEN AND CLOSED

INDUSTRIAL FLOOR GRATINGS FOR STAIRCASES FOR FENCES

MOBILE TWO-STORY INSULATED STORAGE WITH AUXILIARY ROOM FOR HAZARDOUS WASTE

RUBBER-LINED STEEL DIAPHRAGM VALVES, CHECK VALVES, PIPE ELEMENTS AND TANKS

RUBBER-LINED PIPES

RUBBER-LINED 90;45 ELBOWS

RUBBER-LINED REDUCTION ELEMENTS

RUBBER-LINED STEEL ANION AND CATION EXCHANGERS

EQUIPMENT FOR SEAS LAKES RIVERS - CAMPS

Pontoons are made of basic steel structure, hot-dip galvanized and finally painted.

Plastic floats sized length 970 mm, width 340 mm and height 620 mm, filled with air or water-resistant foam, are mounted on the basic steel structure.

The size of the pontoon is formed according to the desired purpose and size by stringing floats 970 mm long along the length and the number of rows of floats 340 mm wide, thus forming the whole of the desired pontoon.

The basic model is made in two rows of 4 floats that make a size of 3.9×2 m. Floats thus formed can make the desired shape according to a sketch or wish.

Connection with land and each other is connected by a movable path 1.2 m wide.

We install on pontoons:

With this combination, fish farms can be formed. If the float is damaged, it is easily replaced with a new one.

SEPTIC TANKS 800 liters single-chamber, double-chamber and triple-chamber

URBAN EQUIPMENT

Made of steel profiles protected with primer and finish paint according to customer's preference, covered with wooden slats protected with wood stain.

The trash container can be emptied by tilting in both directions without removal.

2-meter long bench

Bench supports are made of aluminum protected with paint as desired, covered with wooden slats protected with wood stain or paint of choice.

Made of aluminum and steel protected with primer and finish paint as desired.

The container can be emptied by tilting to both sides.

Sturdy protective posts for pedestrian areas and building protection.

Outdoor shelter structures for public spaces.

BIKE RACKS / STATION STANDS / FLAGPOLES / ADVERTISING PANELS

Durable urban fixtures for bicycle parking, information displays, flags, and advertisements.

CONSTRUCTION EQUIPMENT

Elements are made using rotomolding technology from high-strength polyethylene,

and are interconnected via chains.

It is recommended to additionally secure every 10 elements.

SEPTIC TANK, OIL AND GREASE SEPARATOR, WATERPROOF WATER METER

Purpose:

The water meter window is intended for installation in smaller buildings. The water meter window construction protects the water meter from freezing. After installation of the installation with fittings (pipes, elbows, valves and water meter), everything is covered with a thermo cover and finally with the water meter cover itself. The housing and cover of the water meter window are made of polyethylene with ribs for reinforcement, and no additional concreting around it is required. For vehicle traffic over the water meter window, the plastic housing needs to be reinforced with concrete, and instead of a plastic cover, a steel cover should be installed.